Epson Artisan EMP-830/EMP-835 - Manual (Page 7)

6
EMP Monitor Operation Guide
Main EMP Monitor Window
The main window shows the status information for each projector. To carry
our operations for projectors, select the projectors from the projector list and
then click the buttons.
To close the window, click the in the top-right corner.
Button Functions
The power can be turned on or off and the input source can be changed for
the projectors that are selected from the projector list. The same operations
can also be carried out using the commands in the "Tool" menu.
Buttons
Projector list
"View details"
button
Shows detailed information for the selected projectors.
Power ON Turns the projector power on.
Power OFF Turns the projector power off.
PC1,
InputA Switches to the input source connected to the
[Computer1] port, [Computer] port or [InputA] port.
PC2,
InputB Switches to the input source connected to the
[Computer2] port or [InputB] port.
BNC
Switches to the input source connected to the [BNC]
port.
S-Video
Switches to the input source connected to the
[S-Video] port.
Video
Switches to the input source connected to the [Video]
port.
D4
Switches to the input source connected to the [D4]
port.
DVI,
HDMI Switches to the input source connected to the [DVI]
port or [HDMI] port.
EasyMP Switches to EasyMP or EasyMP.net.
Some connected projectors may not be equipped with all of the above
ports or functions. If you click a button for a port or function that is
not available, the button will not work.
TIP