GRAM FS 481864 N (v)/1 - Manual (Page 44)

EN - 43 -
If your freezer is not operating:
• Are there any electrical faults?
• Is the plug fully in the socket?
• Is the plug fuse or the mains fuse blown?
• Is there any fault in the socket? Examine this by plugging your freezer into a socket
which you are sure that is working.
A rise in the temperature may be caused by;
• Frequent door opening for long periods of time
• Loading with large quantities of warm foods
• High ambient temperature
• An error with the appliances.
Check Warnings:
Warning codes are displayed in the freezer indicators if an incorrect temperature is detected
in the freezer or when a problem occurs in the appliance.
If your freezer is operating too loudly:
Normal Noises
Cracking (Ice cracking) Noise:
• During automatic defrosting.
• When the appliance is cooled or warmed (due to expansion of appliance material).
Short cracking: Heard when the thermostat switches the compressor on/off.
Compressor noise (Normal motor noise): This noise means that the compressor is
operating normally. The compressor may cause more noise for a short time when it is first
activated.
Bubbling noise and splash: This noise is caused by the flow of the refrigerant in the
tubes of the system.
Water flow noise: Normal flow noise of water flowing to the evaporation container during
defrosting. This noise can be heard during defrosting.
E09
Freezer comp. Not
Cold enough
This caution will be
seen especially after
long term of power
failure
1. Do not freeze the foods
that are thaw and use in
short time period.
2. Set the freezer
temperature to colder values
or set the super freeze , until
the compartment gets to
normal temperature.
3. Do not put fresh food until
this failure is off.
4. Please don’t open the
refrigerator doors frequently
until the warning disappears.
5. If the warning continues,
please contact with
authorized technical service.