GRAM FS 481864 N (v)/1 - Manual (Page 43)

EN - 42 -
BEFORE CALLING SERVICE
Repositioning the door
• It is not possible to change the opening direction of your freezer door, if the door handle
on your freezer are installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any handle.
• If the door opening direction of your freezer may be changed, you should contact the
nearest authorised service to have the opening direction changed.
TRANSPORTATION AND CHANGING OF INSTALLATION
POSITION
• The original packages and foamed polystyrene (PS) can be retained if required.
• During transportation, the appliance should be secured with a wide string or a strong
rope. The instructions written on the corrugated box must be followed while transporting.
• Before transporting or changing the installation
position, all the moving objects (ie, drawer, Ice trays,
…) should be taken out or fixed with bands in order
to prevent them from getting damaged.
Carry your freezer in the upright position.
Control warnings:
If the temperatures of the freezer are not at the suitable levels or if there is a problem with
the appliance, your freezer will warn you. Warnings are indicated by warning codes on the
freezer compartment indicators on the indicator panel.
ERROR TYPE MEANING WHY WHAT TO DO
E01 Sensor warning
Call Service for assistance as
soon as possible.
E02 Sensor warning
Call Service for assistance as
soon as possible.
E03 Sensor warning
Call Service for assistance as
soon as possible.
E06 Sensor warning
Call Service for assistance as
soon as possible.
E07 Sensor warning
Call Service for assistance as
soon as possible.
E08
"Low voltage
Warning"
When the power supply
gets lower than 170 V
the appliance gets to
steady position.
• This is not a failure. This
prevents any damages
on the compressor. This
warning will off after the
voltage gets required level.
• If the warning continues,
please contact with
authorized technical
service.