İhlas Aura Roboclean - Manual (Page 18)

18
Installation and operation of
other accessories
When you want to use any of the accessories, attach the accessory to
the appliance before plugging it in.
a. When you want to operate the appliance from the body control panel;
• Activate the suction motor by touching the [ ] On/Off symbol. You may
set the suction power in 9 different levels with the slider switch.
b. If you want to operate the appliance from the trigger control panel;
• Start the suction motor by pressing the [ ] On/Off button. You may
increase or decrease the suction power with the (+) and (-) buttons.
After you have completed vacuuming, stop the appliance by pressing
the On/Off button on the control or by touching the On/Off symbol on the
body and unplug the appliance.
4 - Crevice Brush
It is used for cleaning places which are hard
to reach such as the spaces between central
heating radiators and window edges.
3- Circular Brush
It is used for delicate dusting operations that
will be performed on natural and artificial
flowers, curtains, paintings and dresses etc.
2- Upholstery Tool
It is used for cleaning upholstered surfaces
such as seats and sofas in particular. Thanks
to its specially grooved design with openings, it
never wears out your upholstered surfaces.
1- Carpet and Hard Floor Nozzle
It is used for the daily sweeping of carpets,
rugs and hard floors. You can adjust the length
of the brush by pressing the latch on top of the
tool.