İhlas Aura Roboclean - Manual (Page 17)

17
! WARNING
1 - Unplug power cord by pulling it out of its housing.
2- After adjusting to the desired length and hearing
it click, release it. This action will lock the cord and
prevent it from getting pulled back in its housing.
The red line on the cord indicates the end of the
cord length. Do not pull the cord more when you
see this sign. 3- After all connections are performed, plug in the
appliance and bring it to the standby position.
4- If you want the cord to be pulled back into its
housing, slightly pull and release it. Hold the cord
in your hand to ensure that it is pulled back into its
housing in a controlled manner.
5- Never let children play with the cord.
USAGE AND REWINDING OF THE POWER CORD
USAGE OF THE POWER NOZZLE
a. When you want to operate the appliance from the
body control panel;
• Activate the suction motor by touching the [
] On/Off symbol.
• Activate the Power Nozzle by touching the
[ ] symbol. Press the same button when you
want to stop it.
b. If you want to operate the appliance from the
trigger control panel;
• Start the suction motor by pressing the On/Off
button.
• Start the Power Nozzle by touching the [ ]
button. Press the same button when you want to
stop it.
When you activate the Power Nozzle, your
appliance will begin operating at the maximum
level automatically.
After you have completed vacuuming, stop the
appliance by pressing the On/Off button on the
remote control or touching the [ ] On/Off symbol
on the body and unplug the appliance.
Secure the telescopic tube by pushing it forward to
bring it to the upright position when required.
• Do not use the Power Nozzle to suck up water or
liquids and do not use it on wet surfaces.
• Do not use the Power Nozzle on leather surfaces,
carpets made from animal hide, fur or hair, shaggy
carpets, handmade rugs, Aloe Vera mattresses, and
carpets made with soft fibers.
• It is not recommended to use the Power Nozzle
to clean mattresses. It is recommended to clean
mattresses with Roboclean Small Power Nozzle.
• Before using the Power Nozzle on any type of surface
such as carpets, rugs, upholstery and mattresses; read the user and owner care manuals of these products.
The Power Nozzle may cause damage on surfaces that
are not suitable to be cleaned with the Power Nozzle.
• In case the Power Nozzle becomes obstructed by
bristles, fibers and/or other materials; do not attempt to
use it before removing any of these obstructions. Clean
the cylinder and resume operation.
• Make sure to unplug your Roboclean before performing
any sort of cleaning or maintenance on it.
• Do not let children use your Roboclean device as a toy
or operate it without supervision.