Roborock H6 CE - Manual (Page 17)

Maintenance
Product Warranty
1. Only use original parts. The use of non-original parts may
affect your eligibility for warranty services.
2. If the filter or accessory is jammed, the vacuum will start
and stop several times before shutting off. Clean the filters
and the accessory before further use.
3. If the vacuum is to be left unused for an extended period,
fully charge it and shut it down before storing it in a cool and
dry place. Do not place the vacuum in humid locations or in
direct sunlight. Charge the vacuum at least once every 3
months to prevent damage to the battery.
Emptying the dustbin
1. When the dustbin is full, suction will be reduced. Empty it
before continuing with vacuuming. Before cleaning the
dustbin, disconnect the vacuum from mains power and
keep it switched off.
Cleaning the vacuum
Use a soft dry cloth to wipe the vacuum.
2. To empty the dustbin, push the Dustbin Opener on the
front of the handle in the direction of the arrow to open it,
then empty it into a bin. The dustbin should be emptied at
least once a week.
Dustbin Release
13