Roborock Q5+ - Manual (Page 7)

08
Option 2: Search for “Mi Home” in the App
Store or Google Play or scan the QR code
to download and install the app.
Connect to the App
Option 1: Search for “Roborock” in the App
Store or Google Play or scan the QR code
to download and install the app.
❶ Download app
This robot supports both Roborock and
Mi Home apps. Choose the one that best
meets your needs.
Press and hold the and buttons until
you hear the "Resetting WiFi" voice alert. The
❷ Reset WiFi
Installation B
B1
Important Information
B1-1— Tidy cables and loose items from the
ground and move any unstable, fragile,
precious, or dangerous items to prevent
personal injury or property damage due
to items becoming tangled in, struck by,
or knocked over by the robot.
Note: When using the robot for the first time, follow it
throughout its whole cleaning route and watch for potential
problems. The robot will be able to clean by itself in future uses.
Note: Hold the dustbin cover securely when upside down to
prevent damage from falling.
B1-2— When using the robot in a raised area,
always use a secure physical barrier to
prevent accidental falls that may result in
personal injury or property damage.
B2
Position the charging dock
B2-1— Take the screwdriver from its storage
bin at the bottom of the base.
B2-2— Place dock upside down on a soft, flat
surface (carpet/towel/ cloth) and attach
the base by using the six screws provided.
B2-3— Connect the power cable to the dock,
and keep excess cable inside the storage slot.
B2-4— Place the dock on a hard and flat
floor (wood/tile/concrete etc.). Keep at
least 0.5 m (1.6 ft) of clearance on either
side, 1.5 m (4.9 ft) in front, and 1 m (3.3 ft)
above. Check the location has good WiFi
then turn on.
B2-4-1 More than 0.5m (1.6ft)
B2-4-2 More than 1.5m (4.9ft)
B2-4-3 More than 1m (3.3ft)
Note: The robot may not turn on when the battery is low. In
this case, place the robot directly onto the dock to charge.
B3
Power on and charge the robot
Press and hold the button to power on
the robot. When the power light goes on,
place it on the dock to charge. To maintain
the performance of the high-performance
lithium-ion rechargeable battery pack, keep
the robot charged.
Note: If you cannot connect to the robot due to your router
configuration, a forgotten password, or any other reason,
reset the WiFi and add your robot as a new device.
Notes:
• The actual process may vary due to ongoing app updates.
Follow the instructions provided in the app.
• Only 2.4 GHz WiFi is supported.
Open the Roborock App, tap the “Search for
device” button, or open Mi Home app, tap “+”
in the top right corner and add the device as
instructed in the app.
❸ Add device
reset is complete when the WiFi indicator
light flashes blue slowly. The robot will then
wait for a connection.