Description of the appliance, Extraction, Recirculation – Electrolux 8820 User Manual

Page 5

Description of the Appliance

The hood is supplied as an extractor unit and can also be used with a filtering function

by fitting one charcoal filter.

You will need an original AEG charcoal filter for this function (Available from your

local AEG Service Force Centre).

Only for CHDI 8820: The cooker hood is supplied ready for use as a recirculation

hood and may be used for extraction by

removing the charcoal filter which has been fitted

inside the cooker hood.

Extraction

In this version fumes are extracted to the

outside via a hose connected to the coupling

ring A. Fig. 1.

In order to obtain the best performance the

hose should have a diameter equal to the outlet

hole.

Should there already be a pipe with a diameter

of 125mm that ducts to the outside through the

wall or roof, it is possible to use the 150/125

mm reduction flange provided. In this case the

hood will be slightly noisier.

Fig. 1

Recirculation

The air is filtered through a charcoal filter and returned to the kitchen.

You will need an original AEG charcoal filter for the filtering function. (See Special

Accessories).

Fix the deflector using 4 screws Ø 3.5x6.5 mm. Fig. 2.

Fig. 2