Emprex LCD Monitor LM-1905 - Manual (Page 10)

1. The following frequency range is the working period. If the entered mode between below
period but not match the frequency of supported timing, display optimization would not be
assured. If the entered mode is out of the working period, the display will be blanking
(just show “INPUT SIGNAL OUT OF RANGE”) then go to power saving.
2. Basically, mode judgment is regardless the sync polarity except both or more modes that
are all belong to the supported timing list and could be judged by sync polarity only.
3. In the meantime, real entered frequency of the supported timing is not requested exactly.
4. Normalization of VGA card’ s deviation will be acceptable.
5. Horizontal Frequency
6. Vertical Frequency
- 7 -
Technical Features and Specifications
Interface Frequency
410.4(H)X256.5(V) mm/ 408.24(H)X255.15(V)mm
Horizontal: 31.5 ~ 84KHz
Vertical: 56 ~ 76Hz
31.5 ~ 84KHz
56 ~ 76Hz
Digital
Analog
PC
Display Colors
Frequency
Item Description
Panel
Monitor
Input Signal
Compatibility
Connector
Tilt Tilt Angle
Net
Net
AC
Consumption
Dimensions
(W x H x D)
Weight
Power
Display Size
Pixel Pitch
DVI 29 pin
0.285(H)X0.285(V)mm / 0.2835(H)X0.2385(V)mm
16.2M colors
D-sub 15 pin
WXGA 1440 X 900@75Hz
-5°~20°
4.8kg
449 (W) x 382(H) x 190(D) mm
AC 100~240V, 50Hz/60Hz
Active: < 45W / Standby :< 2W
WXGA 1440 X 900 WXGA 1440 X 900@60Hz