beautypg.com

Basic parameters, Battery, Robot sensors – Roborock S8+ CE User Manual

Page 12: Water tank, Vibrarise mop cloth, Air duct, Dust bag replacement, Charging contact areas, Robot, Auto-empty dock

background image

12

Open the water tank and fill it with

clean water

.

Close the water tank and shake it gently.
Pour out the remaining water as shown.

Remove the VibraRise mop cloth from

the VibraRise mop cloth mount. Clean

the VibraRise mop cloth and air-dry it.

C7-1—

* Clean as required.

C8-1—

* Clean after each use and replace every 3-6 months.

Note:

A dirty VibraRise mop will affect the mopping

performance. Clean it before use.

Use a soft, dry cloth to wipe and clean all

sensors, including:

C7-2—

C7-3—

Note:

If the robot will be left unused for a long period, turn it

off and charge it at least every three months to avoid battery

damage caused by over-discharge.

Battery

The robot is equipped with a built-in high-

performance lithium-ion rechargeable battery

pack. To maintain battery performance, keep

the robot charged during normal use.

C9

Robot Sensors

C7

Water Tank

C8

VibraRise Mop Cloth

* Clean monthly.

Wall Sensor
Reactive 3D Obstacle Avoidance

Sensor
Carpet Sensor
Cliff Sensors

C9-1—
C9-2—

C9-3—
C9-4—

C11

Air Duct

* Clean as required.

C10

Dust Bag Replacement

* Replace as required.

Note:

The dust bag handle seals the bag on removal to prevent

dust leakage.

C10-1—

C10-3—

C11-1—

C10-2—

C10-4—

C11-2—

C11-3—

Use a soft dry cloth to wipe the charging

contacts on the robot. Clean the dock

location beacon, charging contacts, and

electrode brushes on the dock

.

C12

Charging Contact Areas

* Clean as required.

Remove the dustbin cover vertically

as shown.

Clean the filter with a dry cloth.

Unscrew the screws (10) and

remove the cover.

Lift the dust bag out of the dustbin

and discard it.

Install a new dust bag in place

along the slot and put the dustbin

cover back.

Wipe the air duct and cover with a

dry cloth.
Reinstall the cover and screw it

back in place.

Basic Parameters

Robot

Note:

The serial number is on a sticker on the underside of

the robot.

S80ULT

Model

14.4V/5200mAh (TYP)
lithium-ion battery

Battery

< 6 hours

Charging Time

Rated Input

20VDC 1.2A

Auto-Empty Dock

Name

Auto-Empty Dock

Model

AED06HRR, AED07HRR

Rated Input Voltage

220-240VAC

Rated Frequency

50-60Hz

Rated Input
(Dust Collection)

Rated Input
(Charge)

5A

0.5A

Rated Output

20VDC 1.2A

Charging Battery

14.4V/5200mAh (TYP)
lithium-ion battery