Sharp MX-6070N - Manual (Page 7)

7
U/I Customize Guide
General procedure when using the Web page
4
After the settings are completed, tap
[Exit Home Edit Mode].
If [MFP Display Pattern Setting] or [Change Text Color On
Home Screen] is selected, tap [Finish and Return].
After all U/I customize settings are completed, tap the [Logout]
key.
1
Enter the IP address of the machine in your Web browser to access the Web
server.
In the factory default state, you must enter your user password after entering the IP address.
2
On the Web page, click the [System Settings] tab → [Home Screen Settings].
Some settings may require that you enter your user password after clicking [Home Screen Settings]. If you did not
perform user authentication, you must enter the administrator password.
3
Configure the settings.
Exit Home Edit Mode
Return Key Layout
to The Defaults
PC Scan Print from USB
Memory