Bose Solo 15 Series II - Manual (Page 13)

English - 13
Bluetooth ®
Pairing a Bluetooth ® device
Bluetooth ® wireless technology enables you to stream music from
Bluetooth smartphones, tablets, computers or other audio devices
to the system.
Before you can stream music from a
Bluetooth device, you must
pair your device with the system.
1. On the remote control, press and hold until the Bluetooth
indicator blinks blue.
Make sure the Bluetooth indicator blinks blue before you pair
your device.
2. On your Bluetooth device, turn on the Bluetooth feature.
Tip: The Bluetooth feature is usually found in Settings. A gear
icon ( ) often represents Settings on the Home screen.
3. Select Bose Solo system from your device list.
Once paired, Bose Solo system appears connected in
the device list. The system emits a tone and the Bluetooth
indicator glows white.
4. On your Bluetooth device, play music to stream to
the system.
If you cannot pair your device
You may need to clear the system’s Bluetooth pairing list (see
“Clearing the system’s Bluetooth pairing list”). After you clear the
list, try pairing again.
See “Troubleshooting” on page 18 for more information.
Connecting to a paired Bluetooth ®
device
You can stream audio from a Bluetooth ® device to the system.
Note: If there are multiple devices stored in the system’s pairing
list, it may take a minute or two for the paired device to
connect. The system’s Bluetooth indicator shows connection
status (see page 14).
1. On the remote control, press .
The system connects to the last two devices that streamed to
your system.
2. On the device, play music.
If you cannot stream audio from a paired device
The system may have lost connection to the device. Check the
system’s Bluetooth indicator. If the paired device is out of range of
the system, move the device within range.
Switching between connected
devices
The system supports multi-point connectivity, which allows you to
seamlessly switch playing music between connected devices.
The last two devices that streamed to the system remain connect-
ed. During playback, you can pause audio on the streaming device,
and then play music from another connected device.
1. Pause music from the streaming device.
2. On another connected device, play music.
3. Repeat steps 1 and 2 to switch between connected devices.
Clearing the system’s Bluetooth ®
pairing list
When you pair a Bluetooth ® device to the system, the connection is
stored in the system’s pairing list. You may need to clear the pairing
list if you cannot connect to a device. Once you clear the list, you
need to pair the device again.
1. Press and hold for 10 seconds, until the Bluetooth
® indicator
blinks blue.
2. On your mobile device, delete Bose Solo system from the
Bluetooth menu.
The system emits a tone and is ready to pair a device
(see “Pairing a Bluetooth ® device”).