Keystone correction settings – Vivitek Qumi Q3 Plus User Manual
Page 39
33
Keystone Correction Settings
Perform the following steps to change the projector’s keystone correction:
1. Press the OSD Screen Menu button
on the remote control to enter the Settings
menu.
2. Move the cursor to highlight the Keystone Correction settings, and press
to enter
this mode.
3
. Press ,
,
and
buttons to select the desired Keystone Correction mode.
4. Press
button to exit the Keystone Correction settings.
Note:
The keystone correction may be adjusted as required by the application. (Values are
between -35 - +35)