Vivitek Qumi Q3 Plus - Manual (Page 31)

25
Chapter 4 On-Screen Display (OSD) Settings
OSD Menu Controls
Qumi has an On-Screen Display (OSD) settings menu (Menu button found on the remote
control) that allows you to make adjustments and change settings, such as display and audio
settings. The OSD menu has 10 sub-menus:
Language – Allows for the selection of the language for the OSD Menu. Press OSD
Menu key for entry. Select and move to the desired language using the Arrow Keys
and then press the Menu or Exit key to confirm and exit.
• Display Settings – Allows for the adjustment of the projector’s image display settings
to the viewer’s preference. The display settings consist of Bright, Presentation, Movie
and User modes. Select and move to the desired display mode using the Arrow
Keys and then press the Menu or Exit key to confirm and exit.
Sound Settings – Select or adjust the projectors audio settings. The audio settings
consist of Standard, Music, Movie, Sports, and User modes. Select and move to the
desired sound mode using the Arrow Keys and then press the Menu or Exit key to
confirm and exit.
• Color Temperature - Adjust color temperature of screen and RGB parameters to the
user’s preference. Select and move to the desired color temperature mode using the
Arrow Keys and then press the Menu or Exit key to confirm and exit.
• Aspect Ratio Modes – Select the aspect ratio to adjust how the image appears on the
screen. Select and move to the target mode by using Up/Down Key and then press the
Menu or Exit key to confirm and exit.
Projection Mode – Allows for the selection of the projection mode (Depends on
mounting method). Press the Entry button to choose from the available modes.
• Keystone Correction - Corrects misaligned or distorted images so that projection is
displayed correctly on the screen. Select and move to the keystone correction mode
using the Arrow Keys and then press the Menu or Exit key to confirm and exit.
Software update (USB) - Updates system software. Place the software in the root
directory of USB drive, and then press OK Key to enter the update confirmation
interface and select Yes to update the software.
Reset All - Restore factory settings and default parameters of the system, including
image, sound, projection, keystone, etc.
Status - Displays relevant system information (such as software version)
Note:
If the OSD menu is non-active for 10 seconds, it will disappear.