ProSoft Technology 5201-104S-103M - Manual (Page 32)

Web Server FTP Server
Page 32 of 35 ProSoft Technology, Inc.
September 28, 2005
6.1 Logging into the ProLinx unit
Logging into the ProLinx FTP Server is security protected by the user-configured
password in the module's CFG file (in [MODULE] header section). By default the
password protection is disabled. Note the following:
1
If the password is not enabled, then an FTP client can log into the FTP server
using:
USERNAME = 'guest'
PASSWORD = any email address (ex: [email protected])
2 If enabled, then the password entered in the [MODULE] section's password
parameter must be entered. Note that this is case sensitive.