ProSoft Technology 5201-104S-103M - Manual (Page 24)

Web Server Web Page Construction
Page 24 of 35 ProSoft Technology, Inc.
September 28, 2005
The control can also be used to submit selections from a
drop-down dialog. This control can be used for commands or bit, byte or integer
data. The user selects the option from a drop-down list and the value selected is
passed to the module along with the name parameter. Use of this control can
keep a form from being too cluttered with many small controls. The browser sends the name/value pairs entered on the form, after the submit
button is selected, to the module and the module processes each received pair.
The module processes the data received on a PUT or POST using the name and
value fields returned from the browser. Values for all valid names will be placed
in the database. Example code for an HTML form is shown below: Password
The browser sends the name/value pairs entered on the form, after the submit
button is selected, to the module and the module processes each received pair.
The module processes the data received on a PUT or POST using the name and
value fields returned from the browser. Values for all valid names will be placed
in the database.
Example code for an HTML form is shown below:
Password
Control Pump
On
Off
Contrl Mode
Off Line
Local
Remote
Pump Discharge Pressure Setpoint
>">
Flowrate Setpoint
>">
The form area on a Web page for the code above is displayed below:
Note that the value for the two-setpoint parameters on the form will display the
current values from the module's database when the form is loaded. This is
accomplished by using the data insertion tags for the value parameter in each
control. Refer to the next section on the use of data insertion into a Web page.