ProSoft Technology AN-X2-SQD - Manual (Page 10)

Page 4 AN-X2-SQD-MAS June 2013
Installation
Prevent Electrostatic Discharge
The module is sensitive to electrostatic discharge.
WARNING! Electrostatic discharge can damage integrated circuits or
semiconductors. Follow these guidelines when you handle the module:
• Touch a grounded object to discharge static potential
• Do not touch the connector pins
Power
AN-X requires DC power input from 12 to 24 VDC
Left to right the pins on the power connector are chassis ground, negative voltage and
positive voltage. Pin 1 is closest to the Ethernet connector.
The chassis ground should be connected.
Power consumption internally is 225 mA @ 12VDC or 110 mA @ 24VDC.
The part number for the power connector is Phoenix MSTB 2.5/3-ST-5.08
Remote I/O Cabling and Termination
Refer to the Square D Instruction Bulletin # 30598-247-01D2 Local/Remote Interface
Class 8030 Types CRM-210, 211, 220, 222 for detailed information on remote I/O
cabling and installation.
The module has a 5-pin Phoenix connector for connection to the remote I/O network.
The part number for the remote I/O connector is Phoenix Contact MSTB 2.5/5-ST-5.08