ProSoft Technology AN-X-AMX - Manual (Page 7)

AN-X-DCSLOG Page 3
The module firmware can be updated over Ethernet using the Windows utility supplied.
Refer to page 37 for details.
Hardware Features
The module has:
• LEDs to indicate the status of the connection to the Ethernet, its
own internal state, and the state of the connection to the DCS
network
• an Ethernet connector
• a 9-pin D-shell connector to connect to the AutoMax network
• a power connector
Package Contents
• AN-X-DCSLOG module
• CD containing software and documentation
Other Requirements
To transfer data over Ethernet requires:
• 100 Mbit/second Ethernet network and hardware
• Ethernet network should uses switches, not hubs
Modes of Operation
There are three AN-X modes of operation:
• Boot mode. The AN-X is running its low level startup firmware.