ProSoft Technology AN-X-AMX - Manual (Page 36)

Page 32 AN-X-DCSLOG January 2008
This command resets the AN-X. You will receive a warning and be given the
opportunity to Cancel the command.
If you cancel at the filename dialog, the AN-X has already been reset and is in
configuration mode. Use the Utilities/Restart AN-X command to restart it in production
mode.
Click the Next>> button, and select the firmware file you want to download and click
Open.
AnxInit transfers the firmware file and restarts the AN-X.
Patch Firmware
The Utilities/Patch Firmware command applies small patches to the firmware running on
the AN-X.
These patch files files have extension pch.