ProSoft Technology MVI69E-LDM - Manual (Page 16)

Contents MVI69E-LDM ♦ "C" Programmable
Developer's Manual Linux Application Development Module
Page 16 of 130 ProSoft Technology, Inc.
August 21, 2014
1.5.2 Making Configuration Port Connections
You can communicate with the module via RS232 through the Console or through the
Ethernet port using Telnet.
RS-232 Console
You access the Console through Serial Port 1. As a default, the RS-232 Console port is
enabled. You can disable or enable this port. Refer to Enabling and Disabling the Console
Port in the next section.
1 Connect the RJ45 end of an RJ45 - DB9m cable (Cable 14) to the Serial Port 1 of the
module.
2 Connect one end of the Null Modem Cable (Cable 15) to the DB9m end Cable 14.
3 Connect the other end of Cable 15 (null modem cable) to a serial port on your PC or
laptop.
Ethernet Port
1 The module contains a Telnet client which you can access through Ethernet Port 1 (Eth
1) as shown.
2 Connect an Ethernet RJ45 cable to the Eth 1 port of the module and the other end to the
Ethernet network switch.