PLANET HAC-1000 User Manual

Customer support, Hac-1000 default setting

- 9 -

- 10 -

- 11 -

- 12 -

- 13 -

- 14 -

Step 4. Go to Setting  Inclusion/Exclusion to

include/exclude Z-Wave device.



Note

The location of programming switch button
depends on the type of Z-Wave device that
you use. Please refer to the user manual of
the Z-Wave device for details.

Step 7. Go to Room to create rooms to distribute

Z-Wave devices



Step 5. After pressing Inclusion Device, the “Add

Device” message will be displayed.



Step 6. Press the programming switch button on the

Z-Wave device for connection at the same
time.

Step 8. Go to Scene to create scene.



When almost done, you can continue to add your
Z-Wave device or start to remotely control and monitor
your home easily.

Note

If you have any question about Z-Wave
installation, please refer to Z-Wave device
configuration in the user manual.

HAC-1000 Default setting

Default DHCP Client

Default IP Address

192.168.0.253 – if DHCP
Server does not exist in the
network

Default Web Port

Default Login User Name admin

Default Login Password

admin

Search Tools

Smart Discovery

5. Customer Support

Thank you for purchasing PLANET products. You can
browse our online FAQ resource and User’s Manual on
PLANET Web site first to check if it could solve your
issue. If you need more support information, please
contact PLANET Home Automation support team.

PLANET online FAQ:
http://www.planet.com.tw/en/support/faq.php?key=HAC-1000

Home Automation support team mail address:
[email protected]

HAC-1000 Utility:
http://www.planet.com.tw/en/support/download.
php?model=48697&type=8184#list

HAC-1000 User’s Manual:
http://www.planet.com.tw/en/support/download.
php?model=48697&type=3#list

Contents are subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp. All

other trademarks belong to their respective owners.