PLANET PL-701 - Manual (Page 21)

The lower panel contains a history of all remote devices.
Devices are shown here regardless of whether or not they are on the same
logical network.
 Device Name
 MAC
Address
 Password
 Rate(Tx/Rx)
 Network
 Last
Seen
 Last Known Network
 Chipset manufacturer name (Turbo Only devices)
 Date device last scanned
3.5 Security Button
This section describes how to use Security button for configuration in the
following situations:

Establish a new security network (Network AB)
The procedure is as follows:
1. Press the security button on the Powerline (a) during 1~3 seconds.
2. Press the security button on the Powerline (b) during 1~3 seconds.
3. The PWR LEDs start to flash.
4. After a few seconds, the PWR and HP LEDs should be on. The connection of
Network AB is success.
21