PLANET PL-701 - Manual (Page 8)

8
Utility Installation for Windows
The installation procedure for the Powerline Configuration utility
will vary depending on which operating system you are using on
your computer. The following procedure is for installation under
Windows XP. Installation on other operation system is similar.
1. Insert the CD into the CD-ROM drive to initiate the Autorun
program. Once completed, a menu screen will appear.
2. Click on the “Powerline Configuration Utility” hyperlink in
PL-701 field to start the installation. If the menu screen is
not shown, you can start the installation as follows.
Click on l Start Menu/ Run.
Enter l “E:\Utility\setup.exe” in the appeared box, where
“E” is the letter of your CD-ROM drive.
Click on l “OK” button.
3. The utility will be installed into your computer and
a new icon called “Power Packet Utility” will
appear on your desktop.
Note
This utility is only for Windows 2000, 2003, XP,
Vista and Windows 7.
Further Configuration
If you want to configure more detail settings of PL-701, please
refer to user’s manual on the bundled CD.
If you have any difficulty on resolving the problem while
installing or using the PL-701, please contact the dealer where
you purchased this product or you can contact PLANET directly
at the following email address: [email protected]