PLANET PL-501 - Manual (Page 6)

6
Planning your Powerline Network
PL-501
ADE-4400v3
PL-420 PL-201
PL-501
Ethernet 85M Powerline 200M Powerline
IP STB
IPTV and
VOD Services
Internet
With a PL-501 and the other Powerline device installed, a
network can be created over residential Powerline of your
house. PL-501 can be connected to Ethernet switch, hub, and
broadband router or directly connected to PC. If connect directly
to a PC, of course, the PC must be equipped with an Ethernet
card.
All the Powerline devices on the network must use the same
password to communicate each other. This password can be
configured through the Powerline Configuration utility that can
be found in the CD-ROM. The default password of PLANET
Powerline devices is “HomePlugAV”. Thus, all the PLANET
Powerline devices can communicate each other without prior
password configuration. Please refer to User’s Manual on detail
of installing and using Powerline Configuration utility.