PLANET NAS-7202 - Manual (Page 23)

6.3 Disk
1) Disk : Here is the hard disk physical information. Administrator can check disk model, Power on time, disk
health status, capacity and temperature.
That information comes from hard disk S.M.A.R.T message.
If the temperature is up to 55 degree C, the build in Fan will begin to work.
2) External USB storage: you can get the capacity information, and safely remove it.
3) Volume: There are volume settings; for example, create a new volume, and format current volume. Also it
can check volume information such as, available free space and types of file system.
Only support XFS format file system
Format or create volume operation will cause lost data in the hard disk. In wizard setting, when you enter to
create disk volume, there are four disk array mode to choose ,such as “Create single Disk Volume” , “Create
RAID 0 Volume” ,”Create RAID 1 Volume ”and “Create JBOD Volume”.
Creating single disk volume, If you just put one disk, please places it on
disk1 (disk1 that location on the disk box above)
Í
Note
23