Edimax Technology Two-console 16 port PS/2 KVM Switch - Manual (Page 9)

Product Details
Two-console 8 port PS/2 KVM Switch:
Two-console 16 port PS/2 KVM Switch:
Hardware Installation
Before installation, please make sure all of peripherals and computers have been turned off.
The installation of below is based on 8 port-Rack Mount KVM Switch. Please follow the
same installation procedure for 4 and 16 port Rack Mount KVM Switch.
Step 1
Find a convenient place to put your KVM Switch. Its 19” rack mount form factor makes it
ideal to be mounted on 19” rack. When mounting to a rack, attach the included brackets to
the sides of the KVM Switch. Take note of the length of your cables so that your computers,
KVM Switch, keyboard, mouse and monitor are distanced properly.
Step 2 (Local Console)
Connect the monitor to the KVM Switch. Connect the attached cable, or the one included
with your monitor, to the HDDB-15 female port on the back of the KVM unit marked with the
monitor symbol at the CONSOLE connector.