Edimax Technology Two-console 16 port PS/2 KVM Switch - Manual (Page 16)

N
OTE
:
Some O.S. (Operation Systems) like SCO Unix are unable to support “ Hot Plug ” function. If
you apply “Hot Plug” to this kind of O.S., it will cause unpredictable behavior or shut down
the PC. Before using “ Hot Plug ” , please make sure your O.S. and mouse software driver
supports the “Hot Plug” function.
On Screen Display Operation
1. The OSD menu can work with the PC port that is powered on, powered off or even
disconnected. The resolution of OSD menu is fixed to 1024X768 for the PC that is powered
off or disconnected. .
2. When the OSD menu pop up for the hot key, you will see the following small window on
your monitor.
a. The 1 ST line bar is Bank no.
b. The 2 nd column is your PC
system name list. You will find
the system number list from
01 to 04 ( if the current box is
4 port) or from 01 to 8 (if the
current box no. is 8 port) or
from 01 to 16 (if the current
box no. is 16 port). You can
define your PC name in
maximum 8 characters. The
factory default of 16 port KVM
switch PC name is from
“SYSTEM 01”, “SYSTEM
02” ,…, “SYSTEM 16” and 8
port KVM switch is from
“SYSTEM 01”, “SYSTEM
02”,…, “SYSTEM 08”. Besides,
the sun symbol “ ☼ “ near to
the PC name represents the
PC system is powered on.
01 SYSTEM 01 02
03 ☼ SYSTEM 03 04
05 ☼ SYSTEM 05 06
07 SYSTEM 07 08
09 SYSTEM 09 10
11 ☼ SYSTEM 11 12
13 SYSTEM 13 14
15 ☼ SYSTEM 15 16
PgDn/PgUp: BANK SELECT
©/ª: PORT SELECT
TAB : NEXT INSERT :EDIT
ESC : QUIT ENTER :COMPLETE
SCAN: 1 0 SEC. CONSOLE ON /OFF
OSD : 1 0 SEC. CHANGE PASSWORD
SYSTEM 16
☼ SYSTEM 14
☼ SYSTEM 12
SYSTEM 10
☼ SYSTEM 08
SYSTEM 06
☼ SYSTEM 04
☼SYSTEM 02 (
BANK : 1
Use arrow keys “ y “ and “ z “ to select port for destination PC name and press
“ENTER” Key to switch to the PC port you want
Use “ PgUp “ key or “ PgDn” key to select previous or next Bank no. (or Box No.)