PLANET IKVM-16010 - Manual (Page 6)

6
2.2 Hardware Installation Procedures
1. Connect the power supply to IKVM-8010 / IKVM-16010.
2. Connect a monitor to the VGA connector in LOCAL CONSOLE side.
3. Connect a keyboard to the purple USB connector in LOCAL CONSOLE side.
4. Connect a mouse to the green USB connector in LOCAL CONSOLE side.
5. Use 3-to-1 cable to connect IKVM-8010 / IKVM-16010 and PCs. On one end, it
has just one HDDB 15-pin male connector. Please plug it into the computer port
on the rear of IKVM-8010 / IKVM-16010. The other end has three connectors
(male type HDDB 15-pin for PC video, male type Mini Din 6-pin for keyboard
and male type Mini Din 6-pin for mouse). Please plug these three connectors
into the respective ports of computer. If there are multiple PCs, please repeat
the same produce to connect them all. Now, you have finished the hardware
installation of IKVM-8010 / IKVM-16010.