PLANET FPS-1011 - Manual (Page 14)

14
GDI/Host-based Printer
Following is the installation procedures for “GDI/Host-based Printer” installation.
1. Select the “GDI/Host-based Printer” and click “OK”.
2. The program will start installing the Print Server Drivers automatically. You will
see several pop-up screens and some prompt messages in the system tray.
When the system stops prompting, the drivers are all installed. Please wait for a
moment.
3. When the Print Server Drivers are all installed, the following screen will
displayed. Before you click “Connect”, please put your GDI printer’s installation
CD to your CD-ROM drive and read the manual of the GDI printer carefully.
Some GDI printers require users to install the drivers/utilities before connecting
the GDI printer to your computer.
Some GDI printers require connecting the GDI printer to your computer during
the installation. Please refer to the below illustration which is the screen
displayed during the installation.
To connect the GDI printer to your computer through the Print Server just like
you have directly connected the GDI printer to your computer through the USB