PLANET FPS-1010 - Manual (Page 7)

6 7
>> Macintosh (AppleTalk)
1. Click the Apple icon and then Control Panel - Network.
2. Ensure that EtherTalk is selected under AppleTalk Connection.
3. Click Chooser. The Chooser panel will open.
4. Click either the LaserWriter 8 icon (recommended) or the LaserWriter 7 icon.
5. Select a Print Server from the printer list. Print Server names appear in the
form PSxxxxxx (PS followed by 6 digits), as recorded on the base of the Print
Server.
6. Click the Close box. Configuration is now complete.