2 hardware installation, Ardware, Nstallation – PLANET ENW-9800 User Manual

Page 6

2.2 Hardware Installation

Step 1: Please turn off your PC.

Step 2: Remove any metal decorations from your hands and wrists.

Step 3: Remove the cover from your PC.

Step 4: Locate an empty PCI Express slot and remove the corresponding back plate. Save the

screw for use in Step 6.

Step 5: Carefully insert the adapter into the chosen slot and press firmly with proper push to

ensure it is fully seated in the slot.

Step 6: Secure the adapter with the screw you saved in step 4.

Step 7: Replace the PC cover.

Step 8: Power on the PC and refer to next chapter to install the driver of this adapter.