PLANET DKVM-1700 - Manual (Page 15)

3. Installation
3.1 Install DKVM-1700 into Cabinet
3.1.1 Notes
1. Please check all peripherals according the list before installation. To make sure
that the whole unit was not damaged and lost during shipping process. If you
encounter any problem, please contact your dealer.
2. Before installation, make sure all peripherals and computer have been turned
off.
3. The standard brackets are for 614 ~ 1000 mm (distance means front bracket to
rear bracket) cabinet, contact your dealer if you need more longer rear brackets.
4. If your cabinet depth is 828 ~ 1000 mm, please refer “Replace bracket A step”.
And If your cabinet depth is 504 ~ 614 mm, please refer “Replace bracket B and
bracket C step”.
5. Reliable earthing of rack-mounted equipment should be maintained. Particular
attention should be given to supply connections other than direct connections to
the branch circuit.
3.1.2 Hardware Kits Contents
1. Rail with front and rear bracket x 2 (Please identify the brackets. Right and left
sides are different. For cabinet depth 614 ~ 828 mm)
2. Bracket A x 2 (For cabinet depth 828~1000 mm. Please refer page 21)
10