PLANET ENW-9803 - Manual (Page 9)

User Manual of ENW-9801 / ENW-9803
Figure 4: Low Profile Bracket of ENW-9803
LED Color Description
Orange Indicates the link is established at 10Gbps full duplex mode.
Green Indicates the link is established at 1000Mbps full duplex mode. Link Speed
OFF Indicates the link is established at 100Mbps full duplex mode.
Active Green Blink: indicates data transmit and receive through the port.
Table 2: Descriptions of the ENW-9803 LED
2.2 Hardware Installation
Step 1: Please turn off your PC.
Step 2: Remove any metal decorations from your hands and wrists.
Step 3: Remove the cover from your PC.
Step 4: Locate an empty PCI Express slot and remove the corresponding back plate. Save the screw for
use in Step 6.
Step 5: Carefully insert the 10 Gigabit Ethernet adapter into the chosen slot and press firmly with proper
push to ensure it is fully seated in the slot.
- 9 -