beautypg.com

PLANET ENW-9803 User Manual

Pci express 10 gigabit ethernet adapter, Hardware installation, Installation on windows 7

background image

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

PCI Express 10 Gigabit Ethernet
Adapter

Quick Installation Guide

Version 2.1

Thank you for purchasing PLANET ENW-9801/ENW-9803
PCI Express 10 Gigabit Ethernet adapter. It supports x4
PCI Express interfaces. The 10 Gigabit Ethernet adapter
provides a highly cost-effective solution to upgrading
to the 10 Gigabit network with your existing Ethernet
infrastructures.

Operation System Support:

Windows Server 2008R2 32 / 64bits

Windows Server 2012 32 / 64bits

Windows 7 32 / 64bits

Windows 8 32 / 64bits

Linux (2.6.x to 3.14.0)

VMware® ESX 5.x

Hardware Installation

Step 1: Please turn off your PC.

Step 2:

Remove any metal decorations from your
hands and wrists.

Step 3: Remove the cover from your PC.

Step 4: Locate an empty PCI Express slot and remove

the corresponding back plate. Save the screw
for use in Step 6.

3. Please select “Browse my computer for driver

software” for the next step.

4. Insert the bundled CD into the CD-ROM driver.

Installation on Windows 7

Note

This operation is under Win7 which it is
similar to Windows Server 2008.

1. After installing the ENW-9801/ENW-9803 to your PC

and booting it up, Windows 7 will detect it and you
have to install driver.

Package Contents

ENW-9801 x 1

ENW-9803 x 1

Low Profile Bracket x 1

Quick Installation Guide x 1

User’s Manual CD x 1

Step 5:

Carefully insert the 10 Gigabit Ethernet
Adapter into the chosen slot and press firmly
with proper push to ensure it is fully seated in
the slot.

Step 6: Secure the 10 Gigabit Ethernet Adapter with

the screw you saved in Step 4.

Step 7: Replace the PC cover.

Step 8: Power on your PC and refer to the next section

to install driver.

5. Please click “Browse” to specify the driver location

to install. (Assume “E” is your CD-ROM drive. The
driver can be found in E:\DR-ENW-9801v2_ENW-9803
Driver). Click “Next” to continue.

The driver is being installed.

2. Please move and right-click the mouse button for

Ethernet Controller item and select “Update Driver
Software”
.