beautypg.com

PLANET CS-2001 User Manual

Page 10

background image

10

Step 6. The LAN interface address must reflect your network environment. The

defualt LAN interface is set to 192.168.1.x/24. However, if the LAN
interface was changed to 172.16.0.1 (subnet mask: 255.255.255.0), the
IT administrator must configure each PC in the subnet using an available
IP address from this subnet.

Setting: Select Port1 (LAN1).

Interface: Select LAN.

LAN Interface Mode: Select NAT / Routing Mode.

 Fill in the IP Address and Netmask fields.

Figure7. Interface Settings

Important

Once the LAN interface is changed, please enter the new LAN IP
address in the browser next time when you log in the CS-2001
Web UI.

See also other documents in the category PLANET Communication: