PLANET BM-525 - Manual (Page 18)

BM-525 Bandwidth Management Gateway User’s Manual
- 13 -
Dynamic Routing (RIPv2)
„ By enable LAN, WAN, or DMZ Port to send and receive RIPv2 packets, the BM-525
appliance can communicate with internal or external routers and dynamically update the route
table (The MIS engineers can set up routing information update timer and routing information
timeout when it stop to receive the RIPv2 packets and the router will automatically cancel the
dynamic routing table).
SIP protocol pass-through:
„ When user use VoIP or Video Conference has abnormally situation, can use this function to
resolve this problem.
Administration Packet Logging:
„ After enable this function; the BM-525 will record packet which source IP or destination
address is BM-525. And record in Traffic Log for System Manager to inquire about.
Define the required fields of Time Settings
Synchronize Time/Date:
„ Synchronizing the BM-525 with the System Clock. The administrator can configure the
BM-525’s date and time by either syncing to an Internet Network Time Server (NTP) or by
syncing to your computer’s clock.
GMT:
„ International Standard Time (Greenwich Mean Time)
Daylight saving time setting:
„ When user live in the time zone implement daylight saving time, during this time unit will
adjust system time as the local time.