PLANET ADW-4302 - Manual (Page 2)

2
WLAN LED On – Wireless enabled.
Off - No Wireless connections currently exist.
Flashing - Data is being transmitted or received via the Wire-
less access point. This includes “network traffic” as well as user
data.
ADSL On - ADSL connection is available.
Off - No ADSL connection.
Flashing - Data is being transmitted or received via the ADSL
connection.
Internet On - Internet connection is available.
Off - No Internet connection available.
Flashing - Data is being transmitted or received.
Rear Panel
Power port Connect the supplied power adapter here.
10/100BaseT
LAN connections Use standard LAN cables (RJ-45 connectors) to con-
nect your PCs to these ports.
Reset Button
(Reset to Defaults) This button will reset the ADW-4302v2 to the factory
default settings.
To do this, press and hold the Reset Button for five (5)
seconds, until the Status LED is lit, then release the Reset
Button, and wait the ADW-4302v2 to restart using the
factory default values.
ADSL port Connect this port to your ADSL line.
Installation Procedure