PLANET VIP-351PT - Manual (Page 8)

1-
E
n
g
li
sh
Basic Configuration
A. LCD configuration access
1. Press【MENU】to enter or exit configuration menu.
2. Go to 『 3. Settings』‡『4. System Configuration』 to configure the network
configuration.
3. Please configure the phone based on your network configuration: Static, DHCP
or PPPoE.
4. Go to 『 1. Network Setting』‡『Static / DHCP / PPPoE』 and press Select
/ Save to chose the network configuration.
5. Go to 『 2. IP Address (Static)』 and press up / down key to configure the IP
address, then press Save to save changes.
B. Web configuration access
The Enterprise PoE IP Phone provides GUI (Web based, Graphical User Interface)
for machine management and administration.
The default IP address of PoE IP phone is 192.168.0.1. You may now open your
web browser, and insert http://192.168.0.1 in the address bar of your web
browser to logon the IP Phone’s web configuration page.
The IP phone will prompt for logon username / password, please enter: root /
null (without password) to continue machine administration.
Note
In order to connect machine for administration, please locate your
PC in the same network segment (192.168.0.x) of PoE IP phone. If
you’re not familiar with TCP/IP, please refer to related chapter on
user’s manual CD or consult your network administrator for proper
network configurations.
Quick reference in CD-ROM guide
This guide is used to help you startup your Enterprise PoE IP phone settings. It
is also recommended to check the user manual CD-ROM for more details like the
“LCD menu”, “Web Setup”, and how to set the device back to default value.