Preparation on tftp server side, Firmware upgrade steps on vip-101t – PLANET VIP-101T User Manual

Page 33

PLANET VIP-101T Web Configuration Guide

- 33 -

Preparation on TFTP server side

1. Executing TFTP server program, assign firmware file location, and save the path if

necessary. (This part might vary depends on different kind of TFTP server
used.) (In this sample, the file is assigned in c:\)

2. Allocate VIP-101T firmware file in the directory.

Note: If a firmware upgrade is carried out in a NAT environment, it is required to reserve TCP

port 69 for TFTP access.

Firmware upgrade steps on VIP-101T

Log on VIP-101T via web browser by user name: root; password: null

(password may vary because of your machine configuration), and browse to the Firmware up-

grade page, then insert related parameters (Server IP, file name, firmware type selection

…).

After inserting these parameters, please click

“Done” button to start file transmission.