PLANET VIP-101T - Manual (Page 26)

PLANET VIP-101T Web Configuration Guide
- 26 -
System Configurations
System configuration menu can display the system wide information and configuration.
Parameter Description
Keypad Type
Keypad type option is used to setup DTMF transmission method. You may
select DTMF type in VIP-101T for DTMF receiving and transmitting activi-
ties.
Default: H.245 (Signal)
Dialstring Length
You may specify total dialing digit length in this option. Maximum allowed
dialing length is 24 digits, if this parameter is set to zero, this indicates (not
limited, Max. allowed dialed digits count is 24.
Default: 0
Interval between
You may specify the interval (in second) of two pressed digits, if there is no
action in this duration, VIP-101T will dial out the pressed numbers.
Dialstring Digits
Default: 5 seconds
Terminal Digit
Terminal digit selection, once this specified digit is pressed on the keypad,
VIP-101T will send out the dialed digits.
Default: symbol “#”
H.450 Service
This option can be used to enable or disable the H.450 features supported in
VIP-101T. H.450 service supported: call transfer, call on hold and call for-
ward.
Features
Default: on