PLANET SIP-50 - Manual (Page 27)

SIP-50 SIP Proxy Server User’s Manual
Task Prompt Type
From the remote host, run the ssh client and
connect to your SIP Proxy Server by the IP
address that you want to access
None IP Address and port number is 22
When SIP Proxy Server prompts “login as:”,
enter the user name “admin”
Login as: admin
When SIP Proxy Server prompts “password:”,
enter the password “84117341”.
Password: 84117341
Upon successfully entered the password, SIP Proxy Server displays command menu.
SIP 50 Configuration Menu
1) Reset All Config
2) Debug Information Display
3) Reboot the system
q) Quit
Enter Selection:
5.3 Command menu
Type the 1,2,3 or q to select the function.
5.3.1 Reset All Config
If there is system re-organization, firmware upgrade or improper parameters are loaded in SIP Proxy Server,
restoring factory default settings may help you to restore initial state of machine and restart configuration.
5.3.2 Debug Information Display
If there is problem occur, a look at the SIP Proxy Server running messages that will help you to find out the
problem.
5.3.3 Reboot the system
Use this the reboot the SIP Proxy Server.
- 24 -