Eclipse - Fujitsu Ten CD8445 - Manual (Page 186)

186
How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A. only)
Preset channel scan
This function enables reception of all the channels in the preset buttons
for five seconds each.
Press the [SEL] button for less than two seconds.
[P SCAN] will appear at the display, and channels stored under
preset buttons [1] through [6] will be played for five seconds each.
To stop the preset scan mode at a desired channel, press
the [SEL] button again.
The receiver will stay tuned to the desired channel.
Switching displays when using the SIRIUS satellite
radio
Press the [DISP] button for more than one second.
Each time the button is pressed the display item changes in the
following order:
channel name
➔ category name ➔ title ➔ artist ➔ SIRIUS unit ID.
● The maximum number of characters that can be displayed for
each item is as follows:
Title: 38 characters
Artist: 38 characters
Channel: 20 characters
Category: 16 characters
● If there is no name, NO_ DATA will appear.
[SEL] button Buttons [1] to [6] [DISP] button
CD8445.book 186 ページ ２００４年１２月１３日 月曜日 午前１１時３０分