Extron Electronics MSW 4V User Manual
Page 6
VersaTools
®
MSW 4V & 4SV • Installation and Connections
VersaTools
®
MSW 4V & 4SV • Installation
VersaTools
®
MSW 4V & 4SV, cont’d
(2) 4-40 x 3/16" screws
Use 2 mounting holes on
opposite corners
1U Rack Shelf
1/4 Rack Width False Front
Face Plate
A/V
S
W
ITC
HE
R
AU
TO
SWICH
MODE
NORMAL
AU
TO
1
2
3
4
A/V
S
W
ITC
HE
R
AU
TO
SWICH
MODE
NORMAL
AU
TO
1
2
3
4
A/V
S
W
ITC
HE
R
AU
TO
SWICH
MODE
NORMAL
AU
TO
1
2
3
4
Figure 2 — MSW mounted on a VersaTools rack shelf
A/V SW
ITCHE
R
AU
TO
SW
ITC
H
MO
DE
NO
RM
AL
AU
TO
1
2
3
4
A/V
SW
ITC
HER
AU
TO
SW
ITC
H
MO
DE
NO
RM
AL
AU
TO
1
2
3
4
Figure 3 — MSW mounted on a standard rack shelf
Installation
The 1U high, quarter rack width, MSW 4V and MSW 4SV can be
mounted on a rack shelf, mounted under a desk or tabletop, or
mounted on a projector bracket.
Rack mounting
For optional rack mounting, mount the MSW on any of the
following rack shelves:
•
RSF 123 VersaTools 19" 1U rack shelf kit (part #60-190-20)
(figure 2)
•
RSB 123 VersaTools 19" basic 1U rack shelf (part #60-604-20)
•
RSU 126 6" deep universal rack shelf kit (part #60-190-10)
•
RSB 126 6" deep basic rack shelf (part #60-604-10)
•
RSU 129 1U universal rack shelf kit (part #60-190-01)
(figure 3)
•
RSB 129 1U basic rack shelf (part #60-604-01)
On the standard rack shelf, the MTP mounts in one of four
locations to the rear of the rack or in one of four locations to the
front of the rack.
1
.
If installed, remove the feet from the bottom of the MSW.
2
.
Mount the MSW on the rack shelf, using two 4-40 x 3/16"
screws in opposite (diagonal) corners to secure the MSW
to the shelf.
3
.
Install blank panel(s) or other unit(s) to the rack shelf.
Only products in the VersaTools line can be mounted to a
VersaTools shelf. Most 1U rack-mountable Extron
products can be mounted on the standard shelf.
3
2
VersaTools
®
MSW 4V & 4SV • Installation
VersaTools
®
MSW 4V & 4SV • Installation