Extron Electronics MSW 4V - Manual (Page 10)

VersaTools ® MSW 4V & 4SV • Installation and Connections VersaTools ® MSW 4V & 4SV • Installation
VersaTools ® MSW 4V & 4SV, cont’d
Specifications
Video
Gain ............................................... Unity
Bandwidth
MSW 4V ............................ 300 MHz (-3 dB)
MSW 4SV .......................... 250 MHz (-3 dB)
Crosstalk ....................................... <-60 dB @ 3.58 MHz
Switching speed ........................... 20 ms (max.)
Video input
Number/signal type
MSW 4V ............................ 4 composite video
MSW 4SV .......................... 4 S-video
Connectors
MSW 4V ............................ 4 female BNC
MSW 4SV .......................... 4 female 4-pin mini DIN
Nominal level ............................... 1 Vp-p for Y of S-video and for
composite video
0.3 Vp-p for C of S-video
Minimum/maximum levels ...... 0.4 V to 2.0 Vp-p with no offset
Impedance .................................... 75 ohms
Return loss
MSW 4SV .......................... <-25 dB, DC @ 10 MHz
MSW 4V ............................ <-40 dB, DC @ 10 MHz
DC offset (max. allowable) ......... 5.0 V
Input coupling .............................. DC
10
Video output
Number/signal type
MSW 4V ............................ 2 composite video
MSW 4SV .......................... 1 S-video, 1 composite video
Connectors
MSW 4SV .......................... 1 BNC female, (1) 4-pin mini DIN female
MSW 4V ............................ 2 BNC female
Nominal level ............................... 1 Vp-p for Y of S-video and for
composite video
0.3 Vp-p for C of S-video
Minimum/maximum levels ...... 0.4 V to 2.0 Vp-p
Impedance .................................... 75 ohms
Return loss .................................... <-30 dB @ 5 MHz
DC offset ....................................... ±5 mV maximum with input at 0 offset
Switching type .............................. Vertical interval
Sync
Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Control/remote — switcher
Contact closure ............................ (1) 3.5 mm captive screw connector, 5 pole
Contact closure pin configurations See switcher’s panel.
General
External power supply ............... 100 VAC to 240 VAC, 50/60 Hz, external,
autoswitchable; to 12 VDC, regulated
Power input requirements ......... 2.4 watts, 12 VDC, 0.2 A
Temperature/humidity .............. Storage: -40 to +158 °F (-40 to +70 °C) /
10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) /
10% to 90%, noncondensing
Rack mount ................................... Yes, with optional RSU 129 or RSB 129
1U rack shelf, part #60-190-01 or 60-604-01;
RSU 126 or RSB 126 6" deep rack shelf,
part #60-190-10 or 60-604-10; or the
VersaTools
® RSF 123 or RSB 123 rack shelf,
part #60-190-20 or 60-604-20.
Also furniture mountable with optional
MBU 123 Mini Under-Desk Mounting Kit,
part #70-212-01; or projector mountable
with optional PMK 100 (part #70-217-01),
PMK 250 (part #70-562-02), or PMK 300
(part #70-563-02) projector mounting kit
11 VersaTools ® MSW 4V & 4SV • Specifications VersaTools ® MSW 4V & 4SV • Specifications