PLANET VIP-156 - Manual (Page 13)

1-11
(Peer-to-Peer mode) VIP-157S Port 1 to Port 2
communications
Supposing you have one VIP-157S connects to two telephones,
just pick up phone 1 and dial ‘192*168*0*1**5062’, phone
2 will ring.
Analog telephone sets are connected to the phone (RJ-11) ports
of VIP-157S respectively
Operation steps:
a) Pick up the telephone set on VIP-157S port 1, and you
should be able to hear the dial-tone
b) Press the keypad: 192*168*0*1**5062# shall be able to
connect to the VIP-157S port 2
c) Then the telephone set in VIP-157S port 2 should ring.
Please repeat the same dialing steps on port 2 to establish
the first voice communication from VIP-157S
192.168.0.1
1001 1002
1 9 2 * 1 6 8 * 0 * 1 * * 5 0 6 2 #