Voice communication samples, Ata to ata connection via ip address – PLANET VIP-156 User Manual
Page 12
1-10
Voice communication samples
There are several ways to make calls to desired destination in
ATA. In this section, we’ll lead you step by step to establish
your first voice communication via keypad and web browsers
operations.
ATA to ATA connection via IP address
Assume there are two ATAs in the network the IP address are
192.168.0.1, 192.168.0.2
Analog telephone sets are connected to the phone (RJ-11) port
of ATAs respectively
192.168.0.1
192.168.0.2
1 9 2 * 1 6 8 * 0 * 2 #
Operation steps:
1. Pick up the telephone set on ATA A.
2. Press the keypad: 192*168*0*2# shall be able to connect to
the ATA B.
3. Then the phone in 192.168.0.2 should ring. Please repeat
the same dialing steps on ATA B to establish the first voice
communication from ATA A