beautypg.com

Problem cause solution – Electrolux Z5600 Series User Manual

Page 15

background image

Motor will not start.

Electric Plug

Push plug securely into outlet.

Try another outlet.

Check circuit breaker.

Motor suddenly stops.

Thermal Cut Off

Refer to page 8.

Does not clean the carpet or

Filter(s)

Change the filter.

Hint: If picking up fine dust, the filter

floor.

may not look full, but a fine substance tends to reduce

suction when it blocks the airflow through the filter(s)

Make sure the filter is installed properly.

Make sure filter cover is installed properly.

Belt

Replace a cut, loose or out of shape belt.

Brush Roll

Clean hair and thread from bristles and end cap area.

Replace brush roll if bristles are worn.

Hose

Remove any clogs from the hose that restrict the airflow.

No suction at the end of the

Hose

Remove any clogs from the hose that restrict the airflow.

hose.

Check both ends of the hose. (See page 10)

Noise from the brush roll area.

Brush Roll

Remove hood and clean debris from the brush roll area.

Belt

Replace a cut, loose or out of shape belt.

Cleaner is hard to push.

Cleaner Height Setting

Turn adjustment knob to a higher position.

Hint: Put

handle in operating position. Tilt the cleaner back to

raise the front wheels off floor. Then turn the knob.

Belt

Replace a cut, loose and out of shape belt.

Brush roll will not turn.

Brush Roll

Remove hood and clean debris from the brush roll area.

Belt

Replace cut, loose or out of shape belt.

Burning smell.

Brush Roll

Remove hood and clean debris from the brush roll area.

Belt

Replace cut, loose or out of shape belt.

Cleaning height knob will not

Cleaner Height Setting

Hint: Put handle in operating position. Tilt the cleaner

turn.

back to raise the front wheels off floor. Then turn the

knob.

Missing parts

Call Electrolux Customer Services on 08706 055055.

Questions?

Call Electrolux on 08706 055055. Have the model

and serial numbers ready when you call. See rating

plate beneath the cleaner.

15

NOTE: Turn off the switch and unplug the electrical cord before servicing.

PROBLEM

CAUSE

SOLUTION