Electrolux Z5600 Series - Manual (Page 14)

14
Micron Filter
(on certain models only)
Check the micron filter periodically and change as
needed. For maximum efficiency, replace the micron
filter twice a year.
To Replace Micron Filter
1. Push down on latch and pull out on Micron filter door
to remove.
2. Grasp filter and pull out.
3. Place new Micron filter into cleaner.
4. To close, place micron filter door on top of bottom tab,
pivot door up and press door against cleaner until it
latches.
Micron
Filter
Use ELECTROLUX replacement filters ONLY.
Latch
Micron
Filter
Door
HEPA Filter
(on certain models only)
Check the HEPA filter periodically and change as
needed. For maximum efficiency, replace the HEPA
filter twice a year.
To Replace HEPA Filter
1. Push down on latch and pull out on HEPA filter
door to remove.
2. Grasp filter and pull out.
3. Place new HEPA filter into cleaner.
4. To close, place HEPA filter door on top of
bottom tab, pivot door up and press door
against cleaner until it latches.
HEPA
Filter
Door
HEPA
Filter
Latch
Riser Visor Turbo Nozzle
Maintenance Instructions
1. To open Turbo Nozzle, unscrew the
two (2) screws on the side (as pictured).
2. Lift up the bottom housing.
3. Clear blockage from brushroll area.
4. To close, align top and bottom housings and
tighten with the two (2) screws.
Riser
Visor
Turbo Nozzle
Screws
1 2
3 4