Mpman CSU70R - Manual (Page 9)

E-8
CLOCK OPERATION
1. Press the CLOCK button for 2-3 seconds to display the COLOCK symbol, at this time
“24” will flash on the display.
2. Press. “ Button” or “ Button” to select “12” or “24” hours style, then press
CLOCK button again to keep it. At this time, the “hour “on the display will flash, press.
“
Button” or “ Button” to select your desired hour, then press clock button to
keep it
3. At this time, the “minute” on the display will flash, press. “ Button” or “ Button” to
select your desired minute, then press clock button to keep it
4. At this time, the “date” on the display will flash, press. “ Button” or “ Button” to
select your desired date, then press clock button to keep it
ALARM OPERATION
1. Press the “AL1” on the remote control to open and close the ALRAM function
2. Long press the “AL1” for 2-3 seconds to display the ALRAM symbol, at this time the
“hour” will flash on the display, press. “ Button” or “ Button” to select your
desired hour, then press the “AL1” to keep it
3. At this time the “minute” will flash on the display, press “ Button” or “ Button” to
select your desired minute, then press the “AL1” to keep it
4. Select “ZZ” or “Radio” or “CD” for ALARM, press the “AL1” to keep it
5. Adjust the volume to your desired volume, then press the “AL1” to keep it!
The ALRAM function for “AL2” is same as the “AL1”
AUX IN OPERATION
This CD features an aux line-in jack for connecting your iPod, MP3 player or other digital
music player.
1. Connect the headphone jack of your external device to the AUX IN jack located on
the left side of this CD player (The connection cable is not included).
2. Turn on the CD player and it will enter the AUX function mode once an external
device is plugged into the AUX IN jack.
3. Start to play your iPod, MP3 player or other external audio device.
4. Slowly adjust both volume controls on your CD player and the external device.
5. Turn off your iPod, MP3 player and etc. when finish listening. Turn the CD player off
and unplug the AUX IN jack.
Remark: Once the AUX IN jack is plugged, the CD player will automatically enter the AUX
mode no matter the Function Selector is in CD or Radio mode. Remember to disconnect
the cable from the CD player after use in order to be able to listen to the radio or CD
player again.