Mpman CSU70R - Manual (Page 8)

E-7
USB OPERATION
1. Press the STANDBY BUTTON to power on
2. Press the FUNCTION BUTTON to “USB “ position
3. Insert a USB key inside the connector, the unit will display “USB READ”, the USB
indicator light will blink.
4. After read out the total number of tracks, the unit will play the USB automatically
5. Press the “ Button” ,the USB will play the last track, press the “ Button”, the USB
will play the next track, press PLAY/PAUSE BUTTON to pause ,press again to play
6. Press the “VOL+” or “VOL-“ to up and reduce the volume
7. Press the STANDBY to power off
The unit cannot read my USB device.
- Once you have plugged your device to the unit, you may need to switch on the USB
device before it can operate.
- This unit does not support a direct USB connection with a computer. You need to use a
USB device, or a MP3 player.
- If you are using a USB external hard disk: you need to connect your device
simultaneously to an external power source and to the unit. If you are using a self-
powered PMP, make sure that the battery is sufficiently loaded.
- Check that the files system of your USB device is formatted into the FAT or FAT 32
format. USB device formatted into NTFS are not compatible with this unit. Caution: if
you attempt to modify your file system, formatting your device will erase all data.
Please refer to your USB device’s instruction manual first.
SD CARD OPERATION
1. Press the STANDBY BUTTON to power on
2. Press the FUNCTION BUTTON to “CARD “ position
3. Insert a SD CARD inside the connector, the unit will display “CARD READ”, the SD
indicator light will blinking
4. After read out the total number of tracks, the unit will play the SD CARD automatically
5. Press the “ Button” ,the SD CARD will play the last track, press the “ Button”, the
SD CARD will play the next track, press PLAY/PAUSE BUTTON to pause, press
again to play.
6. Press the “VOL+” or “VOL-“ to up and reduce the volume
7. Press the STANDBY to power off
The unit cannot read my memory card.
Check firstly that your memory card is compatible with the unit. Supported memory cards
are SD, SDHC, MMC formats. We have tested this unit with most of the market’s
memory cards ; we cannot however guarantee a full compatibility with all the cards in the
market because of the multiple technology standards in use. Should you have a
compatibility problem: please use a memory card with a lower capacity (2GB or lower) or
else connect the unit through a USB device.